d 63,5
mm d 2 1/2
inch D 79,375
mm C0r 7700
N Basic static load rating, radial m 0,09
kg Mass B 7,938
mm rmin 1
mm min. 1 is the smallest chamfer distance and the largest permissible rounding radius on the shaft and in the housing. D1 73,5
mm nG Öl 5100
1/min Limiting speed With grease lubrication, the permissible value is taken as 70% of the value given in the table. Values are valid for a combination of axial and radial loads in a ratio Fa/Fr >= 0,8. d1 69,4
mm Cr 7200
N Basic dynamic load rating, radial Type: |
more↓