ZENEO bearings NSK Shanghai 71913A5 drawings
I also sell: 52208 Bearing 7309AC / DB Bearing NJ307 + HJ307 bearing 6901-2NKE bearing S6309-2RSR bearing 7222BDF bearing 23052EW33K + H3052 bearing 71909CD bearing GE80ES bearing GE240ES bearing NUP2211E bearing BTM130A / HCP4CDBA bearing 6902ZZ bearing SL182218 bearings AH2336 / 160G Bearing
Needle roller bearings NSK Shanghai 71913A5 drawings
[Bearing] 71913A5 Specifications Dimensions:
Bearing Type: 71913A5 bearing
Inner diameter: 65 mm
Outside diameter: 90 mm
Thickness: 13 mm
Bearings: Angular Contact Ball Bearings
Bearing Brand: NSK Bearings
Spot supply of imported FAG Bearings
characteristic
1, universally matchable bearings are universally matchable bearings through special processing, when the bearing is installed close to each other, any combination can achieve the established internal clearance or preload, and the average load distribution, without the use of pad sheet or the like.
Paired bearings in: When there is insufficient load carrying capacity of a single bearing (using blow-linked configuration) or when to bear the axial load or combined load in both directions (using back to back or face to face configuration).
2, the basic design bearings (can not be used universally matchable) for single bearing configuration
Single row angular contact ball bearings of the basic design of the main application configuration is only one bearing at each location. Its width and the projecting amount of Normal tolerances. Therefore not suitable for the two single row angular contact ball bearings against the installation.
NSK bearing material
g-- rings, rolling elements of hardened steel.
H-- rings, rolling elements made of stainless steel.
NSK bearing cage
M-- copper alloy solid cage.
T-- synthetic resin cage.
W-- stamping cage.
V-- no cage.
NSK bearing seals, dust cover
Z, ZS-- side with steel dust cover.
ZZ, ZZS-- both sides with steel dust cover.
D, DU-- side with a contact rubber seals.
DD, DDU-- both sides with a contact rubber seals.
V-- side with a non-contact rubber seals.
VV-- both sides with a non-contact rubber seals.
We recommend the following models: 6219LU bearings 6005NR bearing LASE50-N bearing HR32020XJ bearing 6203-2RZ bearing 240 / 600EW33K30 bearing NU313ECM NF209 bearing 45224 bearing bearing 7304AC / DB bearing bearing 71913A5
I also recommend 71913A5 bearings use: slide rails, chemical laboratory equipment, combined machine, bucket elevator, forging machine, flotation equipment, tubular heat exchanger, plate shock absorber, jumper machine, etc. use.
Needle roller bearings NSK Shanghai 71913A5 drawings
[Bearing] 71913A5 Specifications Dimensions:
Bearing Type: 71913A5 bearing
Inner diameter: 65 mm
Outside diameter: 90 mm
Thickness: 13 mm
Bearings: Angular Contact Ball Bearings
Bearing Brand: NSK Bearings
Spot supply of imported FAG Bearings
characteristic
1, universally matchable bearings are universally matchable bearings through special processing, when the bearing is installed close to each other, any combination can achieve the established internal clearance or preload, and the average load distribution, without the use of pad sheet or the like.
Paired bearings in: When there is insufficient load carrying capacity of a single bearing (using blow-linked configuration) or when to bear the axial load or combined load in both directions (using back to back or face to face configuration).
2, the basic design bearings (can not be used universally matchable) for single bearing configuration
Single row angular contact ball bearings of the basic design of the main application configuration is only one bearing at each location. Its width and the projecting amount of Normal tolerances. Therefore not suitable for the two single row angular contact ball bearings against the installation.
NSK bearing material
g-- rings, rolling elements of hardened steel.
H-- rings, rolling elements made of stainless steel.
NSK bearing cage
M-- copper alloy solid cage.
T-- synthetic resin cage.
W-- stamping cage.
V-- no cage.
NSK bearing seals, dust cover
Z, ZS-- side with steel dust cover.
ZZ, ZZS-- both sides with steel dust cover.
D, DU-- side with a contact rubber seals.
DD, DDU-- both sides with a contact rubber seals.
V-- side with a non-contact rubber seals.
VV-- both sides with a non-contact rubber seals.
We recommend the following models: 6219LU bearings 6005NR bearing LASE50-N bearing HR32020XJ bearing 6203-2RZ bearing 240 / 600EW33K30 bearing NU313ECM NF209 bearing 45224 bearing bearing 7304AC / DB bearing bearing 71913A5
I also recommend 71913A5 bearings use: slide rails, chemical laboratory equipment, combined machine, bucket elevator, forging machine, flotation equipment, tubular heat exchanger, plate shock absorber, jumper machine, etc. use.