ZWZ HR32920J

 
d 100 mm Bore diameter
D 140 mm Outside diameter
T 25 mm Total width
B 25 mm Width of inner ring
C 20 mm Width of outer ring
Cup r (min.) 1.5 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 1.5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 144000 N Basic dynamic load rating
C0r 205000 N Basic static load rating
Speeds 
Grease 2200 min-1 Grease lubrication
Oil (Oil-bath) 3200 min-1 Oil-bath lubrication
Dimensions
a 24.2 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 111 mm Diameter of shaft abutment
Db (min.) 134 mm Diameter of housing abutment
Da (min.) 132 mm Diameter of housing abutment
Da (max.) 132 mm Diameter of housing abutment
Sa 5 mm Minimum width of space required in housing on large side face
Sb 5 mm Minimum width of space required in housing on small side face
db (max.) 109 mm Diameter of shaft abutment
ra (max.) 1.5 mm Radius of shaft or housing fillet of inner ring
ra (max.) 1.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.33 Constant
Y0 1 Axial load Factors
Y1 1.8 Axial load Factors
Mass
(approx.) 1.18 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK 
HR32920J bearing

<>ZWZ HR32920J