ZWZ 30336D

Boundary Dimensions
d 180 mm Bore diameter
D 380 mm Outside diameter
T 83 mm Total width
B 75 mm Width of inner ring
C 53 mm Width of outer ring
Cup r (min.) 4 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 1010000 N Basic dynamic load rating
C0r 1120000 N Basic static load rating
Speeds 
Grease 850 min-1 Grease lubrication
Oil (Oil-bath) 1200 min-1 Oil-bath lubrication
Dimensions
a 113.1 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 216 mm Diameter of shaft abutment
Db (min.) 352 mm Diameter of housing abutment
Da (min.) 304 mm Diameter of housing abutment
Da (max.) 362 mm Diameter of housing abutment
Sa 10 mm Minimum width of space required in housing on large side face
Sb 30 mm Minimum width of space required in housing on small side face
db (max.) 229 mm Diameter of shaft abutment
ra (max.) 4 mm Radius of shaft or housing fillet of inner ring
ra (max.) 3 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.81 Constant
Y0 0.41 Axial load Factors
Y1 0.74 Axial load Factors
Mass
(approx.) 38.5 kg
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK 
30336D bearings

<>ZWZ 30336D