TWB 30240

 
 
d 200 mm Bore diameter
D 360 mm Outside diameter
T 64 mm Total width
B 58 mm Width of inner ring
C 48 mm Width of outer ring
Cup r (min.) 4 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 645000 N Basic dynamic load rating
C0r 890000 N Basic static load rating
Speeds 
Grease 950 min-1 Grease lubrication
Oil (Oil-bath) 1300 min-1 Oil-bath lubrication
Dimensions
a 68.7 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 227 mm Diameter of shaft abutment
Db (min.) 336 mm Diameter of housing abutment
Da (min.) 318 mm Diameter of housing abutment
Da (max.) 342 mm Diameter of housing abutment
Sa 10 mm Minimum width of space required in housing on large side face
Sb 16 mm Minimum width of space required in housing on small side face
db (max.) 236 mm Diameter of shaft abutment
ra (max.) 4 mm Radius of shaft or housing fillet of inner ring
ra (max.) 3 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.40 Constant
Y0 0.82 Axial load Factors
Y1 1.5 Axial load Factors
Mass
(approx.) 23.8 kg

30240 bearing 
We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK

<>TWB 30240