ZWZ 32348

Boundary Dimensions
d 240 mm Bore diameter
D 500 mm Outside diameter
T 165 mm Total width
B 155 mm Width of inner ring
C 132 mm Width of outer ring
Cup r (min.) 5 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 6 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 3100000 N Basic dynamic load rating
C0r 4100000 N Basic static load rating
Speeds 
Grease 670 min-1 Grease lubrication
Oil (Oil-bath) 900 min-1 Oil-bath lubrication
Dimensions
a 123.2 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 279 mm Diameter of shaft abutment
Db (min.) 464 mm Diameter of housing abutment
Da (min.) 410 mm Diameter of housing abutment
Da (max.) 478 mm Diameter of housing abutment
Sa 12 mm Minimum width of space required in housing on large side face
Sb 33 mm Minimum width of space required in housing on small side face
db (max.) 301 mm Diameter of shaft abutment
ra (max.) 5 mm Radius of shaft or housing fillet of inner ring
ra (max.) 4 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.37 Constant
Y0 0.88 Axial load Factors
Y1 1.6 Axial load Factors
Mass

(approx.) 145 kg

We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
Best China Bearings Manufacturers and Bearing Distributors.
32348 bearing

<>ZWZ 32348