ZWZ HM89444/HM89411

Boundary Dimensions
d 33.338 mm Bore diameter
D 76.2 mm Outside diameter
T 29.37 mm Total width
B 28.575 mm Width of inner ring
C 23.02 mm Width of outer ring
Cup r (min.) 0.8 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 3.8 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 96500 N Basic dynamic load rating
C0r 106000 N Basic static load rating
Speeds 
Grease 4800 min-1 Grease lubrication
Oil (Oil-bath) 6700 min-1 Oil-bath lubrication
Dimensions
a 23.6 mm Effective load center
Abutment and Fillet Dimensions
da 53 mm Diameter of shaft abutment
Da 65 mm Diameter of housing abutment
db 44.5 mm Diameter of shaft abutment
Db 73 mm Diameter of housing abutment
ra (max.) 3.8 mm Radius of shaft or housing fillet of inner ring
ra (max.) 0.8 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.55 Constant
Y0 0.6 Axial load Factors
Y1 1.1 Axial load Factors
Mass
CONE (approx.) 0.419 kg
CUP (approx.) 0.261 kg

<>ZWZ HM89444/HM89411