ZWZ 29675/29630

Boundary Dimensions
d 69.85 mm Bore diameter
D 120.65 mm Outside diameter
T 25.4 mm Total width
B 25.4 mm Width of inner ring
C 19.05 mm Width of outer ring
Cup r (min.) 3.3 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 1.5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 118000 N Basic dynamic load rating
C0r 152000 N Basic static load rating
Speeds 
Grease 2800 min-1 Grease lubrication
Oil (Oil-bath) 4000 min-1 Oil-bath lubrication
Dimensions
a 26.3 mm Effective load center
Abutment and Fillet Dimensions
da 79 mm Diameter of shaft abutment
Da 105 mm Diameter of housing abutment
db 78 mm Diameter of shaft abutment
Db 113 mm Diameter of housing abutment
ra (max.) 1.5 mm Radius of shaft or housing fillet of inner ring
ra (max.) 3.3 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.49 Constant
Y0 0.68 Axial load Factors
Y1 1.2 Axial load Factors
Mass
CONE (approx.) 0.695 kg
CUP (approx.) 0.489 kg

<>ZWZ 29675/29630