ZWZ JHM534149/JHM534110

Boundary Dimensions
d 170 mm Bore diameter
D 230 mm Outside diameter
T 39 mm Total width
B 38 mm Width of inner ring
C 31 mm Width of outer ring
Cup r (min.) 2.5 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 3 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 340000 N Basic dynamic load rating
C0r 520000 N Basic static load rating
Speeds 
Grease 1300 min-1 Grease lubrication
Oil (Oil-bath) 1800 min-1 Oil-bath lubrication
Dimensions
a 43.2 mm Effective load center
Abutment and Fillet Dimensions
da 184 mm Diameter of shaft abutment
Da 217 mm Diameter of housing abutment
db 178 mm Diameter of shaft abutment
Db 224 mm Diameter of housing abutment
ra (max.) 3 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2.5 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.38 Constant
Y0 0.86 Axial load Factors
Y1 1.6 Axial load Factors
Mass
CONE (approx.) 3.1 kg
CUP (approx.) 1.3 kg

<>ZWZ JHM534149/JHM534110