ZWZ 7016C DB DF DT

Boundary Dimensions
d 80 mm Bore diameter
D 125 mm Outside diameter
B 22 mm Width
r(min.) 1.1 mm Chamfer Dimension
r1(min.) 0.6 mm Chamfer Dimension
Basic Load Ratings
Cr 74.0 kN Basic Dynamic Load Rating
C0r 55.5 kN Basic Static Load Rating
Speeds
Grease 11300 min-1 Limiting Speed
Oil (Oil-air) 17100 min-1 Limiting Speed
Dimensions
C: 15° Contact Angle
a 24.7 mm Effective Load Center
Abutment and Fillet Dimensions
da(min.) 87 mm Diameter of Shaft Abutment
Da(max.) 118 mm Diameter of Housing Abutment
Db(max.) 120 mm Diameter of Housing Abutment
ra(max.) 1 mm Radius of Shaft or Housing Fillet
rb(max.) 0.6 mm Radius of Shaft or Housing Fillet
Performance
Pa 34.5 kN Permissible Axial Load
Calculation factors
f0 15.7 Factor
Preload,Rigidity(DB and DF arrangement)
Preload Axial Rigidity Measured axial clearance
EL 202N 78N/μm -6μm
L 382N 102N/μm -14μm
M 921N 151N/μm -31μm
H 1880N 215N/μm -52μm
Additional information
4.7 g/brg Recommended Grease Quantities
Mass
0.855 kg Mass(approx.)

<>ZWZ 7016C DB DF DT