ZWZ HR30310DJ

 
d 50 mm Bore diameter
D 110 mm Outside diameter
T 29.25 mm Total width
B 27 mm Width of inner ring
C 19 mm Width of outer ring
Cup r (min.) 2 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 2.5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 141000 N Basic dynamic load rating
C0r 132000 N Basic static load rating
Speeds 
Grease 3200 min-1 Grease lubrication
Oil (Oil-bath) 4300 min-1 Oil-bath lubrication
Dimensions
a 34.2 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 70 mm Diameter of shaft abutment
Db (min.) 105 mm Diameter of housing abutment
Da (min.) 87 mm Diameter of housing abutment
Da (max.) 100 mm Diameter of housing abutment
Sa 3 mm Minimum width of space required in housing on large side face
Sb 10 mm Minimum width of space required in housing on small side face
db (max.) 62 mm Diameter of shaft abutment
ra (max.) 2 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.83 Constant
Y0 0.4 Axial load Factors
Y1 0.73 Axial load Factors
Mass
(approx.) 1.26 kg


We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
HR30310DJ bearing