ZWZ HR32310CJ

Dimension series
ISO 5FD ISO355 dimension series approx.
Boundary Dimensions
d 50 mm Bore diameter
D 110 mm Outside diameter
T 42.25 mm Total width
B 40 mm Width of inner ring
C 33 mm Width of outer ring
Cup r (min.) 2 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 2.5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 202000 N Basic dynamic load rating
C0r 218000 N Basic static load rating
Speeds 
Grease 3400 min-1 Grease lubrication
Oil (Oil-bath) 4800 min-1 Oil-bath lubrication
Dimensions
a 32.8 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 68 mm Diameter of shaft abutment
Db (min.) 103 mm Diameter of housing abutment
Da (min.) 82 mm Diameter of housing abutment
Da (max.) 100 mm Diameter of housing abutment
Sa 3 mm Minimum width of space required in housing on large side face
Sb 9 mm Minimum width of space required in housing on small side face
db (max.) 59 mm Diameter of shaft abutment
ra (max.) 2 mm Radius of shaft or housing fillet of inner ring
ra (max.) 2 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.55 Constant
Y0 0.6 Axial load Factors
Y1 1.1 Axial load Factors
Mass
(approx.) 1.93 kg

We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
HR32310CJ bearing