ZWZ HR32060XJ

Dimension series
ISO 4GD ISO355 dimension series approx.
Boundary Dimensions
d 300 mm Bore diameter
D 460 mm Outside diameter
T 100 mm Total width
B 100 mm Width of inner ring
C 74 mm Width of outer ring
Cup r (min.) 4 mm Chamfer dimension of outer ring (Cup)
Cone r (min.) 5 mm Chamfer dimension of inner ring (Cone)
Basic Load Ratings
Cr 1770000 N Basic dynamic load rating
C0r 2700000 N Basic static load rating
Speeds 
Grease 670 min-1 Grease lubrication
Oil (Oil-bath) 900 min-1 Oil-bath lubrication
Dimensions
a 98.4 mm Effective load center
Abutment and Fillet Dimensions
da (min.) 327 mm Diameter of shaft abutment
Db (min.) 439 mm Diameter of housing abutment
Da (min.) 408 mm Diameter of housing abutment
Da (max.) 442 mm Diameter of housing abutment
Sa 15 mm Minimum width of space required in housing on large side face
Sb 26 mm Minimum width of space required in housing on small side face
db (max.) 330 mm Diameter of shaft abutment
ra (max.) 4 mm Radius of shaft or housing fillet of inner ring
ra (max.) 3 mm Radius of shaft or housing fillet of outer ring
Calculation factors
e 0.43 Constant
Y0 0.76 Axial load Factors
Y1 1.4 Axial load Factors
Mass
(approx.) 56.6 kg
HR32060XJ bearing

We also offer the following brands
ZWZ LYC C&U TWB TMB HRB LS NSK
Best China Bearings Manufacturers and Bearing Distributors.

<>ZWZ HR32060XJ